Edge protection for Catering Robot

Safety touch edge is also known as bounce rubber strip, safety edge, etc. It is mainly composed of aluminum profile, rubber sleeve, sensing belt, and some other accessories.

Safety touch edge, also known as bounce rubber strip, Safety Edge Switch, is a rubber band pressure-sensitive switch.

1. When a moving part with a safety edge or safety buffer impinges on the operator (or the operator impinges on the moving part), these flexible safety edges are compressed and send a signal to the power source to stop the movement of these parts.

2. The safety or security buffer can be categorized as "with" device. The safety or security buffer will not only restrict access to "feel" it. Safety and security buffer depends entirely on its feeling and switch power to provide security, and the security or safety buffer control circuit of reliable control is very important. Usually security or safety buffer is used only for the power to stop the machine immediately after removal of moving parts.

3. The safety edge or safety buffer together with the controller constitutes a flexible and universal emergency stop system, where the machine operator or installer must be able to stop the dragging device easily and conveniently.

4. A complete safety edge includes an aluminum rail -- safety contact, and safety contact band. The special shape of the safety edge (rubber side) protects the safety contact band from damage and allows the impact Angle of the safety edge to exceed 90 degrees.

5. The safety buffer works in a similar principle to the safety edge, but with some differences in structure. It has a polyurethane covered foam rubber attachment, which is used to protect other objects it comes into contact with.

Touch the edge safety